Silicone tubing is super soft and flexible, 18” long, kink resistant, and latex free. Includes one plastic barb connector (1.5 inches long) that attaches to our pee funnel GOthrough.
Extension tubes can be trimmed to desired length, so they provide easier access to the drain while wearing GOthrough under shorts, skirts and Thighfly pants.
You can also combine the tubes for a longer desired length if you want to wear them under pants to go on the ground, while hiking or camping.
To use the extension tubing, insert the barb gently into the GOthrough drain exit (after you've strapped the pee funnel into your underwear.)
If wearing our Undershorts, feed the tube through the crotch opening in the Undershorts.
Then position the drain and the tube to the left side of your crotch seam if wearing shorts or pants over top.
Make sure the tube is not kinked or obstructed by the crotch in your clothing. The tube should fall next to your inner left thigh, calf and ankle.
Twist and pull gently to remove. Wash and rinse to reuse.
If you would prefer a more rigid tube for greater assurance against kinks, check out the vinyl option. And you can mix and match these tubes when combining.
Adding superglue where the tube attaches to the plastic barb can ensure that the tube stays connected to the barb. (Don’t use glue on the device, though!)
Note: the tubes tend to be in a curved position when you first remove them from the packaging. To straighten, they might need a few days tied to a yardstick or something similar.
Silicone tubing is super soft and flexible, 18” long, kink resistant, and latex free. Includes one plastic barb connector (1.5 inches long) that attaches to our pee funnel GOthrough.
Extension tubes can be trimmed to desired length, so they provide easier access to the drain while wearing GOthrough under shorts, skirts and Thighfly pants.
You can also combine the tubes for a longer desired length if you want to wear them under pants to go on the ground, while hiking or camping.
To use the extension tubing, insert the barb gently into the GOthrough drain exit (after you've strapped the pee funnel into your underwear.)
If wearing our Undershorts, feed the tube through the crotch opening in the Undershorts.
Then position the drain and the tube to the left side of your crotch seam if wearing shorts or pants over top.
Make sure the tube is not kinked or obstructed by the crotch in your clothing. The tube should fall next to your inner left thigh, calf and ankle.
Twist and pull gently to remove. Wash and rinse to reuse.
If you would prefer a more rigid tube for greater assurance against kinks, check out the vinyl option. And you can mix and match these tubes when combining.
Adding superglue where the tube attaches to the plastic barb can ensure that the tube stays connected to the barb. (Don’t use glue on the device, though!)
Note: the tubes tend to be in a curved position when you first remove them from the packaging. To straighten, they might need a few days tied to a yardstick or something similar.
Image 1 of 8
Image 2 of 8
Image 3 of 8
Image 4 of 8
Image 5 of 8
Image 6 of 8
Image 7 of 8
Image 8 of 8